If you’re looking for the ultimate machine to build face-fames, look no further. The multi-spindle DK3100 contains three spindles which allow you to drill two Pocket Holes across rails of varying widths in just one machine cycle – something that no other Pocket-Hole machine on the market can do. Best of all, it can also be quickly changed to drill a single Pocket-Hole, like our DK1100 series, by simply removing a drill bit. In short, if you’re serious about face-frame production, the DK3100 is the machine that will deliver real performance to your shop and profits to your bottom line.

The DK3100 not only drills two Pocket-Holes in one cycle, it also gives you options for spacing the holes. You can set the drill spindles at 3/4”, 1” and 1-3/4” on center, perfect for today’s most common rail widths.

Pocket-Holes Twice as Fast!
Multiple spindles give you the option of three different hole spacings to fit today’s most common face-frame widths. If you would prefer to drill only one Pocket- Hole, no problem, just remove a drill bit and you get the equivalent of our DK1100 single-spindle machine. Only Kreg offers you the option of one or two Pocket-Holes at a time and your choice of three different on-center hole spacings in the same machine.

Easy Setup
The lift-off top gives you direct access to the drill bits. A simple turn of an allen wrench in the drill bit collets is all it takes to change bits. In less than a minute, you can change to any of the three settings or set up the DK3100 for single-spindle drilling.

One-Second Cycle Times
Two Pocket-Holes in one second? It’s not a dream, it’s reality with the DK3100. The one-touch foot pedal fires the spindle to make two perfect Pocket-Holes in one second.

Durable
The DK3100 uses a hardened steel drill guide that supports the drill bits all the way into the workpiece, prolonging drill bit life and improving the cut quality of the Pocket-Hole.